A industrial conveyor dryer is a continuous drying equipment widely used in the chemical, food, and pharmaceutical industries. It achieves efficient drying of materials through continuous material conveying and hot air circulation. Below, we will provide a detailed introduction to belt dryer operation to help you better operate and maintain the equipment.
- Pre-Startup Preparation
Check that all equipment components are intact, the drive system is flexible, and the hot air circulation system is functioning properly.
Clean the interior of the dryer to ensure there is no residual debris.
Adjust the dryer’s temperature, air speed, and other parameters based on the material’s properties and requirements.
- Startup Operation
Turn on the power switch and start the belt dryer.
Start the material conveying system and evenly distribute the material to be dried on the conveyor belt.
Adjust the conveyor belt speed to ensure the material remains in the dryer for an appropriate amount of time for optimal drying.
According to the drying conditions of the material, adjust the hot air temperature, air speed, and other parameters appropriately to ensure even drying.
- Shutdown Operation
When the material is completely dried, shut down the material conveying system.
Shut down the hot air circulation system and reduce the internal temperature of the dryer.
Turn off the power switch and stop the belt dryer.
IV. Maintenance and Care
Regularly inspect all equipment components and replace any worn or damaged parts promptly.
Clean the interior of the dryer to prevent material residue from affecting subsequent use.
Maintain the hot air circulation system to ensure unobstructed hot air circulation.
Regularly replace wearing parts such as filters and seals based on equipment usage.
V. Precautions
Operators should be familiar with the structure and performance of the belt dryer and strictly follow the operating procedures.
Maintain a uniform distribution of materials during the drying process to avoid areas of excessive dryness or moisture.
If any abnormality or malfunction is detected during operation, immediately stop the machine for inspection and troubleshooting.
Through the above introduction, we believe users have a clearer understanding of how to use a industrial conveyor dryer. In actual operation, users should flexibly adjust equipment parameters according to specific circumstances to ensure efficient and uniform drying of materials.